DO NOT REMOVE THE RATING PLATE AS THE INFORMATION
ON IT IS IMPORTANT.
The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
Power lead type – H 0 V V – F 3G 1,5.
IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
Applying the condensation strip
o The condensation strip must be fitted to the underside of the
worktop to protect it against the ingress of moisture. The strip will
deflect steam that rises from your appliance, away from the
underneath of the worktop.
o The condensation strip will be located inside of your dishwasher.
o Ensure that the underneath of the worktop is clean before sticking
the strip to it.
o Separate the backing paper away from the strip.
o Stick the condensation strip to the underneath of the worktop.
o IMPORTANT: Failure to attach the condensation strip could result
in damage to your worktop.
33
To Next Page
Loading...
