Baumer NE215 - Batch Counter Function and Tachometer Settings; Time Meter and Code Setting; Communication Parameter Settings

33
NE215
Line 36 Function of batch counter
0 * external
1 internal
2 Tachometer
Line 37 Impulses per unit at tachometer
00.00 Minimum value
1.00 * Default value
9999.99 Maximum value
Line 38 Time basis for tachometer function
0 * 1 secound
1 2 secounds
2 3 secounds
3 6 secounds
4 10 secounds
5 20 secounds
6 30 secounds
7 60 secounds
Line 39 Not applicable
Line 40 Function of time meter
0 * Time meter is running
1 Time meter on / off
Line 41 Code setting
0000 * Code not active
:
9999
Line 43 Baud rate
0 * 4800 Baud
1 2400 Baud
2 1200 Baud
3 600 Baud
Line 44 Parity
0 * Even Parity
1 Odd Parity
2 No Parity
Line 45 Device address
00 * Minimum value
:
99 Maximum value
Line 46 Stop bit
0 * 1 Stop Bit
1 2 Stop Bit
Open interface description