7
of 80
Application Manual POWERLINK Controlled Node
Document no. 5.13013.04
2FUNDAMENTAL SAFETY
INSTRUCTIONS
In this chapter the dangers are prescribed, which can arise during parameterization of the
Baumüller b maXX 4000 controller unit and the meaning of the information sign is ex-
plained.
2.1 Safety notes and mandatories
WARNING!
Danger from modification of the parameter settings!
The change of parameters affects the behavior
of the Baumüller-unit and conse-
quently the behavior of the construction a
nd its components. If you change the ad-
justments of the parameters, you may cause a
dangerous behavior of the
construction and/or of its components.
Therefore:
m After each modification of the parameter
settings, a commissioning with consider-
ation to all safety instructions and sa
fety regulations must be executed.
2.2 Information sign
NOTE!
This note is a very important information.
To Next Page
Loading...
