EasyManua.ls Logo

Baxi COMBI INSTANT 105e User Manual

Baxi COMBI INSTANT 105e
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Baxi Combi Instant 105e
Gas Fired Wall Mounted Combination Boiler
Users Operating
Instructions
Please keep these instructions safe.
Should you move house, please hand
them over to the next occupier.

Other manuals for Baxi COMBI INSTANT 105e

Question and Answer IconNeed help?

Do you have a question about the Baxi COMBI INSTANT 105e and is the answer not in the manual?

Baxi COMBI INSTANT 105e Specifications

General IconGeneral
ModelCOMBI INSTANT 105e
CategoryBoiler
TypeCombi
Fuel TypeNatural Gas
Efficiency90%
MountingWall Mounted
ERP RatingA
Central Heating Flow Temperature30 - 80 °C
Weight32 kg
Efficiency RatingA

Summary

Warnings

Safe Installation

Details safe installation requirements and regulations for the appliance.

Gas Leaks

Provides immediate actions and contact information in case of suspected gas leaks.

Appliance Servicing

Recommends annual servicing by a competent person for safety and economy.

Electricity Supply

Specifies the electrical requirements, including earthing and fuse protection.

Introduction

Boiler Introduction

Describes the Baxi Combi Instant 105e as a gas-fired, room-sealed combination boiler.

Instant Domestic Hot Water

Explains the function and supply of instant domestic hot water via stored primary water.

Facia Panel Overview

Details the controls and neon indicators located on the boiler's facia panel.

Operating the Boiler

Boiler Operation

Guides on turning the boiler on/off and selecting operating modes for heating and hot water.

Temperature Control

Explains how to adjust central heating and domestic hot water temperatures using controls.

Flame Failure Reset Procedure

Describes the procedure to reset the boiler if the flame failure neon indicates an issue.

Safety Thermostat Operation

Details the safety thermostat function and reset procedure in case of overheating.

Air Flow Monitor Indicator

Explains the air flow monitor neon and its indication of flue system blockages or faults.

Pump Fault or Low Pressure

Describes the neon indicator for pump faults or low system pressure and checks required.

Sensor Fault Indicator

Explains the neons indicating faults with hot water or central heating temperature sensors.

Pump Protection Feature

Details the automatic pump operation to prevent sticking during periods of inactivity.

Central Heating System Pressure

Guides on checking and maintaining the correct central heating system pressure.

To Shut Off the Boiler

Provides instructions for short-term and long-term shutdown of the boiler.

Frost Protection Mode

Explains the frost protection feature and conditions for its operation.

Clearances and Check List

Clearances around the Boiler

Specifies minimum clearances required around the boiler for operation and servicing.

Pre-Contact Check List

Provides a checklist of items to verify before contacting a service engineer for a fault.

Cleaning, Spares & Guarantee

Cleaning the Outercase

Instructions for cleaning the external panels of the boiler using appropriate methods.

Spare Parts Information

Information on obtaining spare parts and details required for ordering.

Appliance Guarantee

Details the manufacturer's guarantee period and conditions for repair or replacement of parts.

Related product manuals