Transport on rollers
Caution! Risk of damage to boiler by impacts during transporting! The boiler must
be protected during transport against impacts! In addition avoid forces on the gas
pipes or the fan by pulling or pushing!
Note: The use of rollers for transporting is only possible on completely even floors.
Pieces of steel pipe with a width of approx. 1000 mm and a diameter of approx. 30
mm can be used as rollers.
Fig. 8: Transport on rollers
- Place the pieces of pipe on the floor spaced at approx. 300 mm.
- Lift the boiler using a crane or fork lift on the pipe pieces.
- Move the boiler on the rollers to the installation room
Prior to installation
12
To Next Page
Loading...
