Fig. 11
B. Ensure the top of the doors and the bottom
of the doors are even. Place a straight edge
on the top of the doors to verify.
NOTE: If adjustments are required - adjust hinge
plates.
Fig. 12
C. If a door is difficult to open loosen the (top
and bottom) corresponding strikers and
slide the strikers toward the door hinge
point.
Fig. 13
D. If a door will not remain closed loosen the
(top and bottom) corresponding strikers and
slide the strikers away from the door hinge
point.
Fig. 14
E. If the top of the door unlatches before the
bottom of the door - or the bottom of the door
unlatches before the top of the door - loosen
the corresponding striker that is unlatching
first and move away from the door hinge
point.
OV310 Series Mini Rack Oven Installation Instructions - INSTALLING OVEN
F25422 Rev. B (0917) Page 12 of 16