baxter OV500G1-EE - PROGRAMMING THE OVEN; SINGLE STEP RECIPES

– 12 –
PROGRAMMING THE OVEN
Single Step Recipes
The recipe menu stores up to 99 recipes that can be recalled by number when needed. A recipe is a set
of baking instructions (temperature, time & steam time, vent and fan delay settings) that the operator
denes for any baking operation.
1. With the oven in the OFF mode, press and hold the UP arrow in the STEP section. While pressing
and holding the UP arrow, press and hold the POWER ON OFF button for 3 seconds. When all the
displays light, the oven is in the recipe mode.
2. Press the RECIPE UP or DOWN arrows until the recipe number that is desired is displayed.
3. Press the TEMP UP or DOWN arrows to enter the desired temperature.
4. Set the Time, Steam, Fan Delay, and Vent settings:
• Press the UP or DOWN arrows next to TIMER to enter the desired time.
• Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time.
• Press the UP arrow next to FAN DELAY to enter the desired time.
NOTE: Steam and fan delay settings are optional and can be left at 0 if desired.
• Press the VENT button to vent the cavity for the entire time of the step. When step is complete,
vent will close.
5. To store the recipe, press the RECIPE UP or DOWN arrows to move to the next recipe number or
press the POWER ON OFF button to exit the recipe mode. To store additional recipe settings, repeat
steps 2 to 4.