19
ENUSER’S MANUAL DSC
EN
1. Technical parameter
19
2. Function summary
19
3. Outlook & components
20
4. Displays statement
20
5. Keys statement
21
6. Operation
22
7. Menu set
24
8. Attention
25
9. Warranty
25
1. TECHNICAL PARAMETER
A/D Conversion Precision 21 bit A/D bit conversion
Resolution display 30.000
Accuracy grade III grade
Zero Drift ≤0.15uv % ºC
Sensitivity Drift ≤12PPM/ ºC
Non-linearity ≤0.01 % F.S
Excitement voltage DC5V
Load cell Resistance strain
Power supply AC220V±10 % ~ 50Hz 6W
DC6V/4AH storage battery
Working environment Temperature 0 ºC ~ 40 ºC, humidity ≤80 % RH
Firmware Version SdL-6
2. FUNCTION SUMMARY
1. Unit selection: kg, g, lb.
2. Number’s upper & lower limit alarm
3. Overload alarm
4. Accumulation
5. Tare and its preset
6. No backlight and auto-backlight adjustment
7. Storage battery self-protection during the low power
8. Weighing, counting
9. Multi-point, single-point calibration
10. Zero tracing adjustment
11. Dynamic detection range adjustment
12. Average value filter adjustment
13. Random weight calibration
To Next Page
Loading...
Need help?
General
