21
ENUSER’S MANUAL DSC
5. KEYS STATEMENT
KEY FUNCTION I
1.
PCS set: for collecting the unit of the product.
2.
Unit weight set: for presetting the unit weight if you know the unit weight of the product.
3.
Hi/lo set: for presetting the upper and lower limit alarm.
4.
Tare preset: for presetting the know tare.
5.
Clear: for clearing the inputted number and accumulated records.
6.
Accumulation: for accumulating weight and total quantity.
7.
Zero: for clearing the slight weight and back to zero.
8.
Tare: for deducting the tare.
9.
Accumulation display: for seeing the accumulated records.
10
0-9: numeral key, for inputting the unit weight or other numerical value.
11.
For inputting radix point and submenu selection key.
KEY FUNCTION II
1.
Zero: press and hold [zero] unit enter single-point calibration mode.
2.
Alarm preset: press and hold [ ] before turning the scale on, and then you can enter the menu
set.
3.
For a long time to switch the backligh mode.
To Next Page
Loading...
