To Next Page

To Previous Page

ENG FR ES

User’s guide Price Computing Scale Model RTI

3.3. Acumulator operator

3.3.1. Prepare to accumulate

Eachtimebeforeaccumulate,pleasemakesuretheplatterisempty,thecu-

rrentaccumulatorvaluesisresettozero,andtheweightreadingisstable.

3.3.2. Accumulative operation

Puttheweighingitemonplatter,inputtheunitpriceorpressthePLUtorecalla

unitprice,waitfortheweightreadingtobestable,pressthe key,thewin-

dowwillshowtotalandthetotalprice.Alsoitispossibletoaccumulatewithout

weigh(nonweighedproducts).Followthesameprocedurewithoutneedingto

putweightonthescale.

3.3.3. Account operation

Afterdoaccumulateoperate,youcanpress key,kgwindowwillshow

thesummedweight,themoneytopaythatwillappearonthewindowof€.To

press keytoreturnatnormalweighingmodeandtodoanotheraccumu-

lationoperation.Topressthemoneygivenbythecustomer(forthechange

calculation)andthewindowwillshowthevaluetogivebackandthetotal.

3.4. Unit price memory

Thescalecanstore28setsdirectand99indirectunitprice.

3.4.1. Save the unit price

Tomarkthepriceoftheproductandtopressthekeyfrom ~ where

itisdesiredtostoreduring3seconds,ortopressethe keyduring3se-

condsandtousethe9numericalkeysfrom to toselectthelocation

ofthememorythatyouwishtouse,thentomarkthenameoftheproduct,

theunitprice,andthentopressthethenpressthe keytosave.Afterthis

operation,theunitpricewillbestoredinthescale.

3.4.2. Load the unit price

Ifyouwanttousetheproductname,unitpricestoredinthescale,press

~ keysdirectly,orpress key,pressnumerickeytoselectwhich

memorylocation’spriceyouwanttouse,currentunitpriceandproductname

willchangetothevaluestoredinthememory.

Baxtran RTI User Guide

Other manuals for Baxtran RTI