Do you have a question about the BCI Capnocheck Plus and is the answer not in the manual?
Details warranty terms, proprietary notices, and loaner device policy for the Capnocheck Plus.
Provides contact information for service, explains manual content, and lists definitions for warnings.
Outlines critical warnings, cautions, and notes for safe operation and maintenance of the device.
Guides users on how to enter and navigate the Field Service Menu for device configuration.
Explains the parameters available in the Field Service Menu, including sensor readings and settings.
Details the circuit design and operation of the battery charging system.
Describes the system's power supply and the circuitry for powering the unit on and off.
Explains the microprocessor, memory addressing, and address decoder implementation.
Details the control circuits for the display module and speaker volume.
Covers circuits for external I/O, pump/valve control, speaker driver, analog outputs, and RS232.
Describes the real-time clock, watch dog timer, and analog sensor acquisition circuits.
Lists key signals and describes the functions of the main board components.
Introduces the optional LOX board and details its power supply and interface.
Explains the isolated interface and reset mechanisms between LOX and main boards.
Describes the LOX board's microcontroller and analog-to-digital converter.
Details the LED drive control and analog signal processing for the Oximeter.
Lists and defines signals specific to the Oximeter board.
Lists required test equipment and outlines steps for visual inspection of the device.
Details the procedure for testing power supply voltages on the main and LOX boards.
Covers testing of inlet sample flow and occlusion verification for the pneumatic system.
Provides a comprehensive list of part numbers and descriptions for the device.
Contains assembly drawings and detailed schematics for various boards and modules.
| Display Type | LCD |
|---|---|
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Battery Life | Up to 8 hours |
| Respiration Rate | 0-150 breaths per minute |
| Battery Type | Rechargeable lithium-ion |
| Resolution | 1 mmHg |
| Humidity Range | 10% to 95% (non-condensing) |
| Dimensions | 200 x 100 x 50 mm (7.9 x 3.9 x 2.0 inches) |