BCS 710 - Maintenance Programme

Two Wheel Tractor Power Unit
TWT/PU/0413 Page 11
Maintenance Programme
OPERATION EVERY
DAY
EVERY
WEEK
EVERY
MONTH
EVERY 6
MONTHS
ENGINE Check engine oil level 10w/40
See separate engine manual
X X
GEARBOX
&
CONTROLS
Check gearbox oil level
(see page 13)
X X
Check nuts & bolts X X
Ensure clutch cable has free play X
Check tyre pressure (20psi) X X
Lubricate control cable/linkages X
Check control cable operation X
Check operation of safety devices X
Change gearbox oil (see page 13) X
Grease gear speed detent ball X X
* Pressure washing machines remove lubricating grease as well as dirt. It is imperative all
linkages, especially the gear speed lever detent ball, are kept well greased otherwise they will
becomedifculttooperateandcausedamage.
* DO NOT allow maximum engine speed to exceed 3600rpm.