BCS 710 - Troubleshooting Guide

Two Wheel Tractor Power Unit
Page 14 TWT/PU/0413
Troubleshooting Guide
PROBLEM POSSIBLE CAUSE REMEDY
Unable to select gear Pressure washing has removed
lubrication of gear lever detent
ball.
Grease the detent ball and
quadrant.
Unable to pull engine over Machine has been tipped on
side for cleaning and engine
oilhaslledthecylinderbore
causing a hydraulic lock.
Remove spark plug and air
lter.Standtoonesideand
pull over engine to clean out oil.
Changeengineoilandairlter.
Clean spark plug.
No drive to wheels or
working implement
Check gearbox oil level. Top up if necessary with API
GL-580w/90oil(seepage13).
Engine smokes There may be petrol in the
engine oil due to fuel tap being
left on during transportation.
Change engine oil.
Contaminatedairlter. Replace element.