BDI Corridor 6531 - Step 10: Install Kleets

BDIUSA.COM | 17NEED ASSISTANCE? customerservice@bdiusa.com
Install (H10) Kleets to the (C2) Desktop panel on
the opposite side of the drawer using pre-drilled
pilot holes in the desk’s underside. Fasten using
6 (H11) Wood Screws using the (T2) Phillips
Screwdriver.
ASSEMBLY
STEP 10. INSTALL KLEETS
PART/DESCRIPTION QTY
T2-PHILLIPS
SCREWDRIVER
1
H10-KLEET 3
H11-SCREW 6
H10
H10
H10
H11
H11
H11
C2