What to do if my Be Cool Dehumidifier does not start?
If your Be Cool Dehumidifier isn't starting, there are a few potential reasons. First, ensure the mains cable is fully plugged into the socket. Also, check if the water tank is full and needs emptying. Finally, the unit is designed to operate between 5°C and 32°C, so note the temperature range.
What to do if my Be Cool Dehumidifier has water leakage?
If you notice water leakage from your Be Cool Dehumidifier, check the hose connection to ensure it is not loose. Also, inspect the drainage system for any blockages and remove any obstacles, ensuring the water pipe is straight.
Why is my Be Cool Dehumidifier noisy?
If your Be Cool Dehumidifier is making unusual noise, consider these possibilities: First, ensure the appliance is placed on a flat surface. Secondly, a clogged air filter could be the culprit, so clean the filter. If the unit 'hisses' slightly, this is normal due to the sound of the refrigerant.
Why my Be Cool Dehumidifier does not dry the air as desired?
If your Be Cool Dehumidifier isn't drying the air effectively, check if the filter is dirty and clean it. Also, consider that the dehumidification capacity is reduced in the dry season when the room temperature or air humidity is low.
Why does frost occur on the coils of my Be Cool Dehumidifier?
Frost on the coils of your Be Cool Dehumidifier is normal, especially when the room temperature is close to or below 15°C. The dehumidifier defrosts automatically.
Essential safety rules for device operation and potential hazards.
Guidelines for safe connection, power cord handling, and repairs.
Precautions for children's interaction with the device and packaging.
Rules for operating environment, placement, and device usage.
Guidance on moving, storing, and shutting down the appliance.
Safe practices for maintenance and unplugging the device.
Information regarding the refrigerant used in the device.
Safety measures for installation and handling flammable refrigerants.
Instructions for environmentally sound disposal of the product and packaging.
Statement confirming compliance with EU regulations and directives.
List of items included in the product package.
Identification and labeling of the dehumidifier's parts.
Steps to unpack the unit and prepare for installation.
Guidelines for placing the unit on a stable surface with adequate clearance.
Checks before operating, including air flow and power connection.
Explanation of the control panel buttons and indicators.
How to set the timer for on/off functions.
Details on Dry Key, Fan Speed, LED-Display, Humidity adjust, Mode, On/Off.
Explanation of Auto, Continuous, and Dry operating modes.
Procedures for emptying the water tank when it is full.
Instructions for connecting a drain hose without a pump.
Instructions for connecting a drain hose with a pump.
Basic maintenance steps for the dehumidifier.
Steps for cleaning the water tank, unit surface, and filter frame.
How to clean and replace the air filter.
List and meaning of error codes displayed by the unit.
Causes and solutions for the dehumidifier failing to start.
Solutions for drying performance and unusual noise problems.
Troubleshooting water leakage and frost formation on coils.
Key technical specifications of the dehumidifier.
Addresses and phone numbers for customer support and service.
Details on the warranty period, terms, and common exclusions.
Requirements for making a warranty claim and associated fees.
Information on product registration and submitting a warranty claim.
General| Brand | Be Cool |
|---|---|
| Model | BC50LEF2301 |
| Category | Dehumidifier |
| Language | English |
To Next Page