www.mybebook.com
7.11 Wi-fi Configuration Dialog
Configure the Wi-fi through this dialog. The operations used to activate a Wifi access
point are:
z Make sure the Wi-fi switch on the left side of the BeBook Neo is turned on (slide
upward).
z BeBook Neo scans the Wi-fi access points around.
z All of the connectable access points are listed.
z Select one of the networks and BeBook Neo starts connecting to it.
z If it is an encrypted access point, a keyboard dialog pops up. You can input
password for connection.
Fig. 7.11 Snapshot of Wi-fi Configuration Dialog
To Next Page
Loading...
