www.mybebook.com
11 Software Update BeBook Neo
You can update the software by follow steps:
z Download the latest updates package from BeBook website:
www.mybebook.com/support
z Save the updates package in a SD card.
z Make sure the updates package is located at the root directory of the SD card.
The name should be ‘bebook_update.upd’.
z Insert the SD card into BeBook Neo.
z Restart BeBook Neo, press and hold the OK button. NOTE, the OK button should
be pressed before the device restarts. Hold it until you see the message
‘Software update request detected, checking updates…’.
z BeBook Neo updates itself automatically. It restarts after update finishes.
Reminder: Make sure BeBook Neo has enough power to finish the software update
(at least 2 grids displayed).
To Next Page
Loading...
