Technical Instruction
Replacement of the Transceiver
Retrofit-Instructions Issue 01 November 2016 AR6201 13
3.3. Verification
• Check that the AR6201 is fixed correctly.
• Check that the AR6201 wirings are completed.
• Check the power supply lines and confirm correct polarity.
• Check the power supply protection (fuse or circuit breaker).
o For the AR6201 a 7.5 A external circuit breaker or fuse shall be installed.
• Check on all systems that connectors are in place and mechanically secured.
• Inspect the installation behind the instrument panel.
o Make sure that all cable looms, wirings and connectors are placed securely and
have to be clear of the steering devices when fully moved in all directions.
o Make sure that all pitot/static tubes are in place and mechanically secured.
To Next Page
Loading...
