Becker Centronic EasyControl EC141-II User Manual

Centronic EasyControl
EC141-II
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com
4034 630 346 025.10.2017
de
Montage- und Betriebsanleitung
Mini-Handsender
en
Assembly and Operating Instructions
Mini hand-held transmitter
fr
Notice de montage et d’utilisation
Mini-télécommande
nl
Montage- en gebruiksaanwijzing
Mini-handzender

Becker Centronic EasyControl EC141-II Specifications

General

Frequency	868.3 MHz
Modulation	FSK
Output Power	< 10 mW
Supply Voltage	3V
Power Supply	Battery

Summary

General Information

Explanation of Pictograms

Explains the meaning of warning and information symbols used in the manual.

Warranty Information

Safety Instructions

Provides crucial safety guidelines for installation and operation of the device.

Intended Use

Display and Button Explanation

Function Explanations

Channel Programming

Describes how transmitter channels are programmed for single or multiple receivers.

Channel Indicator Lamp Function

Explains the function and behavior of the indicator lamp and battery status.

Transmitter Programming

Master Transmitter Programming

Details the process of setting up the initial master transmitter for the receiver.

Additional Transmitter Programming

Outlines the steps to add more transmitters after the master transmitter is programmed.

Battery Replacement

Cleaning Instructions

Technical Specifications

Troubleshooting

EU Declaration of Conformity