Becker Centronic EasyControl EC545 User Manual

Centronic
EasyControl EC545
fr
en
de
nl
Montage- und Betriebsanleitung
5-Kanal-Handsender
Wichtige Informationen für:
• den Monteur / • die Elektrofachkraft / • den Benutzer
Bitte entsprechend weiterleiten!
Diese Anleitung ist vom Benutzer aufzubewahren.
Assembly and Operating Instructions
5-channel hand-held transmitter
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept for future reference.
Notice de montage et d’utilisation
Emetteur portable 5 canaux
Informations importantes pour:
• l’installateur / • l’électricien / • l’utilisateur
À transmettre à la personne concernée !
Cette notice doit être conservée par l’utilisateur.
Montage- en gebruiksaanwijzing
Handzender 5-kanaals
Belangrijke informatie voor:
• de monteur / • de elektricien / • de gebruiker
Aan de betreffende personen doorgeven!
De gebruiker dient deze gebruiksaanwijzing te bewaren.

Becker Centronic EasyControl EC545 Specifications

General

Frequency	868.3 MHz
Power Source	Battery
Frequency Range	868.3 MHz
Modulation	FSK
Operating Temperature	-10°C to +55°C

Summary

General

Warranty

Safety Tips

Use in Accordance with Regulations

Displays and Pushbuttons

Functions

Transmission Control Light

Indicates signal transmission and battery status; flashes when battery is low.

Group Control

Enables simultaneous control of multiple receivers via single commands on six radio channels.

Programming the Remote Control

Group Pushbutton

Selects channels (up to 5) or central command, indicated by LEDs.

Learning the Master Transmitter

Steps to activate receiver learn mode and successfully pair the master transmitter.

Learning Additional Transmitters

Procedure to add more transmitters to the receiver after the master transmitter is programmed.

Installing the Wall Mount

Changing the Battery

Technical Data

Troubleshooting

General Conformity Declaration