Becker Centronic EasyControl EC545 - Installing the Wall Mount; Changing the Battery

14
Assembly and Operating Instructions
Installing the wall mount
• Before installing in the position re-
quired, check that the transmitter
and receiver are functioning prop-
erly.
• Fix the mount to the wall with the two
screws provided.
1. Open the battery compartment
door.
2. Take out the batteries.
3. Insert the new batteries in the cor-
rect position.
38,5
95
43,6
Clean the device with a damp cloth
only. Do not use a cleansing agent
since this could damage the plastic.
Changing the battery