To Next PageTo Next Page
Need help?Do you have a question about the Becker Centronic EasyControl EC545-II and is the answer not in the manual?
General| Frequency | 868.3 MHz |
|---|---|
| Modulation | FSK |
| Output Power | 10 mW |
| Power Supply | 2 x AAA batteries |
| Weight | 60 g (without batteries) |
Defines warning symbols like CAUTION and ATTENTION for user safety and property protection.
Outlines requirements for modifications, installation, and product use compliance.
Emphasizes manual safety, dry use, original parts, child safety, regulations, and battery disposal.
Warns to keep people clear of system travel and ensure visibility during operation.
Specifies indoor use, avoiding interference areas, safety device requirements, and connection to approved systems.
Labels buttons (UP, STOP, DOWN, Channel, Programming) and indicators (lamps, labelling field, type plate).
Explains programming channels for individual/group control and central command for simultaneous operation.
Describes how indicator lamps show channel selection, transmission, and low battery status.
Details steps to prepare the receiver and program the first (master) transmitter.
Outlines the procedure to program subsequent transmitters using the master transmitter.
Instructions for fixing the bracket to the wall and verifying transmitter/receiver function.
Advises consulting the "Technical data" chapter for the correct battery type.
Recommends using a soft cloth and avoiding aggressive cleaning agents.
Lists technical details like voltage, battery type, temperature, output power, frequency, and maximum range.
Provides remedies for problems like the drive not functioning or the desired drive not responding.
States compliance with Directive 2014/53/EU and provides a web address for the full text.
