Becker Centronic SunWindControl SWC241 User Manual

FR
GB
DE
NL
Montage- und Betriebsanleitung
Handsender
für Wind-Steuerung
Wichtige Informationen für:
• den Monteur / • die Elektrofachkraft / • den Benutzer
Bitte entsprechend weiterleiten!
Diese Anleitung ist vom Benutzer aufzubewahren.
Assembly and Operating Instructions
Hand-held transmitter
for wind control
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept for future reference.
Notice de montage et d’utilisation
Télécommande
pour système vent
Informations importantes pour:
• l’installateur / • l’électricien / • l’utilisateur
À transmettre à la personne concernée !
Cette notice doit être conservée par l’utilisateur.
Montage- en gebruiksaanwijzing
Handzender
voor windbesturing
Belangrijke informatie voor:
• de monteur / • de elektricien / • de gebruiker
Aan de betreffende personen doorgeven!
De gebruiker dient deze gebruiksaanwijzing te bewaren.
Centronic
SunWindControl SWC241

Becker Centronic SunWindControl SWC241 Specifications

General

Brand	Becker
Model	Centronic SunWindControl SWC241
Category	Transmitter
Language	English

Summary

General Information

General

Overview of the SWC241's capability to control sun protection systems and set wind surveillance thresholds.

Warranty Terms

Information regarding structural modifications, installation compliance, and permitted product processing.

Safety Guidelines

Essential safety tips for operating the device, including usage in dry rooms and handling of batteries.

Product Usage and Operation

Intended Use

Specifies that the SWC241 is for operating sun protection systems and notes limitations in high-interference areas.

Threshold Actuator Safety

Highlights the safety function of the threshold actuator and warns against incorrect setting of values.

Device Interface and Functions

Displays and Pushbuttons

Identifies and explains the function of each button and indicator on the hand-held transmitter.

Operational Functions

Explains the transmission control light and the concept of group control for multiple receivers.

Configuration and Settings

Wind Threshold Control

Details how to set wind threshold values using the control switch, with 11 different levels available.

Test Mode Operation

Describes the activation and automatic termination of test mode when setting the threshold.

Factory Default Settings

Specifies the default wind threshold value set at the factory (Left limit stop at 2 m/s).

Advanced Operations

Remote Control Programming

Instructions for learning the master transmitter and additional transmitters to the receiver.

Installation and Maintenance

Wall Mount Installation

Guide on how to properly install the wall mount for the transmitter, including screw fixation.

Battery Replacement

Step-by-step instructions for opening the compartment and replacing the batteries.

Technical Specifications and Troubleshooting

Technical Data

Lists key technical specifications like nominal voltage, battery type, protection class, and radio frequency.

Troubleshooting Guide

Provides solutions for common problems such as non-functioning drive or flashing transmission control light.

Compliance Information

General Conformity Declaration

Statement of compliance with EC Directive R&TTE 1999/5/EC for use in EU and CH countries.