EasyManua.ls Logo

Becker Centronic SunWindControl SWC241 - Product Usage and Operation; Intended Use; Threshold Actuator Safety

Becker Centronic SunWindControl SWC241
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FR
GB
DE
NL
13
Intended use
The SWC241 may be used to operate sun protection systems only.
Please note that radio sets cannot be operated in areas with increased risk of
interference (e.g. hospitals, airports).
The remote control is only permitted for equipment and systems with which a
malfunction in the hand-held transmitter or receiver does not present a risk to
persons, animals or objects, or this risk is covered by other safety devices.
The operator does not enjoy any protection from disturbances by other re-
mote signalling equipment and terminal equipment (for example, also by
radio sets operated in the same frequency range in accordance with regula-
tions).
Use radio receivers in conjunction only with devices and systems permitted
by the manufacturer.
Attention
The threshold actuator is equipped with a safety function. False set-
ting of the threshold values may cause damage to your sun protection
system. The setting of the threshold values should therefore only be
handled by your specalised dealer or under his surveillance.
Note
Ensure that the controls are not installed and operated in the vicinity of
metal surfaces or magnetic elds.
Radio sets transmitting at the same frequency could interfere with re-
ception.
It should be noted that the range of the radio signal is restricted by leg-
islation and constructional measures.

Related product manuals