Becker Centronic SunWindControl SWC241 - Technical Specifications and Troubleshooting; Technical Data; Troubleshooting Guide

18
Assembly and Operating Instructions
Technical data
Nominal voltage 3 V DC
Type of battery LR 03 (AAA)
Protection class IP 20
Permissible surrounding temperature -10 to +55 °C
Radio frequency 868.3 MHz
What to do if ...?
Problem Cause Remedy
Drive is ot functioning,
transmission control
light is not lit.
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Insert new batteries.
2. Insert batteries cor-
rectly.
Drive is not function-
ing, transmission
control light is lit.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
1. Reduce distance to
the receiver.
2. Programme transmit-
ter.
Transmission control
light is ashing.
Battery power is low. Replace batteries.