Becker Centronic EasyControl EC545 - Technical Data; Troubleshooting; General Conformity Declaration

fr
en
de
nl
15
Nominal voltage 3 V DC
Type of battery LR 03 (AAA)
Protection class IP 20
Permissible surrounding temperature -10 to +55 °C
Radio frequency 868.3 MHz
Becker-Antriebe GmbH hereby declares that the device EC545 Centronic Easy-
Control complies with the basic requirements and other relevant regulations of
the EC Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH
Subject to technical changes without notice.
Technical data
What to do if ...?
General conformity declaration
Problem Cause Remedy
Drive is not functioning,
transmission control
light is not lit.
1. Batteries are dead.
2. Batteries are incor-
rectly inserted.
1. Insert new batteries.
2. Insert batteries cor-
rectly.
Drive is not functioning,
transmission control
light is lit.
1. Receiver outside the
radio range.
2. Transmitter is not
programmed in the
receiver.
1. Reduce distance to
the receiver.
2. Programme transmit-
ter.
Transmission control
light is ashing.
Batteries are running
out.
Insert new batteries.
The required drive is not
functioning.
Wrong group selected. Select correct group.