Becker S20 MLS - Abbreviations Used; Installing the Control Unit; Electrical Connection; Installing the Mains Connection


Assembly and Operating Instructions
IMP 
LS 
MLS  
SKS 
DW-Testing 
EL 
OSE 
NA 
Abbreviations used
Installing the control unit
Caution
The control unit may only be connected by a qualied electrician!
Observe the relevant VDE standards!
The equipment must always be securely disconnected from the mains
during all installation work!
When connecting, refer to the technical data of the S20 MLS. The
indicated maximum values must not be exceeded!
Installing the mains connection
S20 MLS 





Electrical connection
         
         


Note
Cut the edges to size, so that the cut-outs can be
removed more easily.


S20