Becker TLF 2.250 User Manual

Checking and Changing Vanes
1. Wipe away any grease from the rotor, clean up the end-shield and vane slots.
2. Use Scotch Brite™ to clean surfaces. Do not remove large amounts metal. (No machining.)
3. Brake Cleaner can be used to clean with.
3. Light grit sand paper (220) can be used to clean out the vane slots.
9

Becker TLF 2.250 Specifications

General

Frequency	50/60 Hz
Housing Material	Cast iron
Voltage	230 V
Impeller Material	Bronze
Connection Outlet	1" BSP