Need help?Do you have a question about the Beckhoff EL2809 and is the answer not in the manual?
General| Number of outputs | 8 |
|---|---|
| Nominal voltage | 24 V DC |
| Electrical isolation | 500 V (E-bus/field potential) |
| Weight | approx. 60 g |
| Protection class | IP20 |
| Technology | Digital Output |
| Output current | 0.5 A |
| Storage temperature | -40…+85 °C |
Details safety regulations, exclusion of liability, and explains safety instruction symbols.
Introduction, technical data, and pin assignment for the EL2808 HD EtherCAT Terminal (8 digital outputs, 24 VDC, 0.5 A).
Introduction, technical data, and pin assignment for the EL2828 HD EtherCAT Terminal (8 digital outputs, 24 VDC, 2 A).
Introduction, technical data, and pin assignment for EL2809/EL2889 HD EtherCAT Terminals (16 digital outputs, 24 VDC).
Introduction, technical data, and pin assignment for EL2872/EL2872-0010 HD EtherCAT Terminals (16 digital outputs, 24 VDC).
Introduction, technical data, and pin assignment for EL2819 HD EtherCAT Terminal (16 digital outputs, 24 VDC, with diagnostics).
Provides instructions for protecting devices from electrostatic discharge during handling.
Introduces TwinCAT as a development environment for real-time control and programming.
Details TwinCAT 2 and TwinCAT 3 development environments and their features.
Describes the process for updating Beckhoff EtherCAT slave firmware (EL/ES/EM/EP series).
To Next Page