Beckhoff PS1011-2410-0000 - 1 Overview

Overview
PS1011-2410-0000 5Version: 1.0
1 Overview
PS1011-2410-0000 | Power supply 24V, 10A, 1-phase
• AC 100-240V wide-range input
• Active power factor correction PFC
• Width only 49mm
• Efficiency of up to 95.2%
• Full power between -25°C and +55°C
• DC-OK relay contact
The PS1011-2410-0000 is a 1-phase 24V power supply with an output current of 10A and an output power
of 240W.
On the input side, the device features a wide-range input, active power factor correction (PFC) and inrush
current limiting.
The output operates according to the UI characteristic curve and switches to the safe hiccup mode in case of
overload/short-circuit.
The power supply is part of the PS1000 family and has a width of 49 mm. A DC OK LED and a potential-free
relay contact monitor the status of the output voltage.
Overview of technical data
*)
Overview of technical data PS1011-2410-0000
Output voltage DC 24V
Adjustment range 24 - 28V
Output current 10A (at 24V, amb.< +55°C)
6.25A (at 24V, amb.< +70°C)
8.6A (at 28V, amb.< +55°C)
5.4A (at 28V, amb.< +70°C)
Output power 240W (amb.< +55°C)
150W (amb.< +70°C)
Input voltage AC AC 100-240V ±10%
Mains frequency 50-60Hz ±6%
Input current AC 2.17 / 1.18A at 120 / 230Vac
Power factor 0.98 / 0.93 at 120 / 230Vac
Efficiency 94.0 / 95.2% at 120 / 230Vac
Temperature range -25°C to +70°C
Dimensions (W x H x D) 49x124x124mm
(without DIN rail)
Weight 540g
Approvals/markings CE
cULus
EAC
*) All values typical for 24V, 10A, 230Vac, 50Hz, +25°C ambient temperature and after a warm-up time of
five minutes, unless otherwise stated.