Beckman Coulter BiomekFX - User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Summary

Introducing the Biomek FX Laboratory Automation Workstation

1.2 Biomek FX

1.2.3 Light Curtain and Other Protective Barriers

Covers safety features like light curtains and protective shields to prevent injury.

1.4 Starting the Biomek FX

Learning to Create Methods for the Biomek FX

2.2 Creating a New Method

Guides users through building a simple method for liquid transfer.

2.3 Configuring the Instrument Setup Step

Explains how to configure the Instrument Setup step for obstacle avoidance.

2.4 Configuring a Transfer Step for Multichannel Pod

Details configuring a transfer step using a Multichannel Pod.

2.4.2 Configuring Tip Handling

Explains how to configure tip handling for liquid transfers.

2.4.3 Configuring Source Labware

Details setting up the source labware for a transfer step.

2.4.4 Configuring Destination Labware

Details setting up the destination labware for a transfer step.

2.5 Configuring a Combine Step for Span-8 Pod

Details configuring a combine step using a Span-8 Pod.

2.5.2 Configuring Tip Handling

Explains tip handling configuration for the Span-8 Pod combine step.

2.5.3 Configuring Source Labware

Details setting up source labware for the Span-8 Pod combine step.

2.5.4 Configuring Destination Labware

2.6 Configuring a Move Labware Step

2.7.1 Handling Configuration Errors

2.8 Saving a Method

2.9 Running a Method

Explains how to run a saved method using the simulator or instrument.

Using the Editors While Creating Methods

3.3 Creating New Labware in the Labware Type Editor

3.4 Creating a New Pattern

3.5 Creating a New Deck

3.6 Manually Controlling the Pod

Beckman Coulter BiomekFX Specifications