Beckman Coulter BiomekFXP User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Beckman Coulter BiomekFXP Specifications

General

Brand	Beckman Coulter
Model	BiomekFXP
Category	Laboratory Equipment
Language	English

Summary

Introducing the Biomek® FX Laboratory Automation Workstation

1.2.1 Pods and Heads

Details the different types of pods and heads used in the Biomek FX.

1.2.2 Automated Labware Positioners (ALPs)

1.2.3 Light Curtain and Other Protective Barriers

Discusses safety features like light curtains and protective shields.

1.4 Starting the Biomek® FX

Guides on initial setup steps for the Biomek FX instrument.

1.4.1 Turning On the Biomek FX

Instructions on how to power on the Biomek FX instrument.

1.4.2 Launching the Software

Steps to launch the Biomek Software and log in.

1.4.3 Homing All Axes of the Biomek FX Pod

Details the process of homing the Biomek FX pod axes for operation.

Learning to Create Methods for the Biomek® FX

2.3 Configuring the Instrument Setup Step

Explains how to configure the Instrument Setup step for obstacle avoidance.

2.4 Configuring a Transfer Step for Multichannel Pod

Details configuring a Transfer step for liquid transfer using a Multichannel Pod.

2.4.2 Configuring Tip Handling

2.4.3 Configuring Source Labware

2.4.4 Configuring Destination Labware

2.5 Configuring a Combine Step for Span-8 Pod

Details configuring a Combine step for liquid transfer using a Span-8 Pod.

2.5.2 Configuring Tip Handling

2.5.3 Configuring Source Labware

2.5.4 Configuring Destination Labware

2.7.1 Handling Configuration Errors

Describes how to identify and correct method configuration errors.

2.9 Running a Method

Instructions on how to run a saved method using the Biomek FX simulator.