How to troubleshoot a blank display on Beckman Coulter Laboratory Equipment?
If the Beckman Coulter Laboratory Equipment display is blank, check the following: 1. Ensure the fuse in the mains supply is working. 2. Verify the power cord is correctly plugged in. 3. Make sure the mains power is switched on. 4. Confirm that the door is correctly closed.
What to do if the Beckman Coulter Laboratory Equipment centrifuge won't start and the speed is locked?
If the Beckman Coulter Laboratory Equipment centrifuge cannot be started and the set speed value cannot be changed, the door lock might not be closed correctly. Try opening and closing the door. If the error persists, contact Beckman Coulter Field Service.
What to do if Beckman Coulter Microfuge 20 Laboratory Equipment centrifuge decelerates and shows error 19?
If the Beckman Coulter Laboratory Equipment centrifuge decelerates during operation and displays error 19 after powering on, quit by pressing the door key.
General| Brand | Beckman Coulter |
|---|---|
| Model | Microfuge 20 Series |
| Category | Laboratory Equipment |
| Language | English |
Defines safety alert levels (Danger, Warning, Caution) and important notes for user guidance.
Covers electrical safety, fire prevention, and safe mechanical operation guidelines for the centrifuge.
Addresses safe handling of chemical and biological substances and associated risks.
Outlines the manual's content, product certifications, and its scope for users.
Details typographic conventions, safety symbols, and labels for clear user understanding.
Explains the basic operation and built-in safety mechanisms of the centrifuge.
Details the centrifuge's physical structure, drive system, and temperature control for refrigerated models.
Covers the user interface, technical specifications, and available rotors for the centrifuge.
Provides detailed steps for preparing the centrifuge and loading rotors correctly.
Guides users on setting speed, time, temperature, and acceleration/deceleration settings.
Covers run time management, stopping, precooling, quick runs, and saving operational programs.
Instructions for mid-run parameter changes, stopping the run, and unloading the rotor.
Details error messages, their causes, and recommended actions for resolving issues.
Lists common malfunctions and procedures for accessing samples during power outages.
Outlines regular inspections, cleaning steps, and drive shaft lubrication for longevity.
Covers decontamination, sterilization, and proper storage/transport guidelines for the unit.
Provides information on ordering replacement parts and other essential supplies.
Covers safety warnings, environmental requirements, and ventilation for correct installation.
Specifies electrical needs, dimensions, and procedures for performing a test run.
To Next Page