Need help?Do you have a question about the Beckman Coulter JA-25.50 and is the answer not in the manual?
General| Maximum Speed | 25, 000 RPM |
|---|---|
| Maximum RCF | 62, 000 x g |
| Material | Aluminum |
| Rotor Type | Fixed-angle |
| Tube Angle | 25° |
| Tube Material | Polypropylene |
| Compatibility | Beckman Coulter centrifuges |
Explains different alert types (Warning, Caution, Important, Note) used in the manual.
Provides crucial safety guidelines and precautions specific to the JA-25.50 rotor.
Lists essential checks to perform before using the rotor to ensure safety and proper function.
Details on cleaning, lubricating, and preparing the rotor for loading samples.
Instructions on precooling the rotor and selecting the correct centrifuge settings.
Step-by-step guide on how to properly install the rotor onto the centrifuge drive hub.
Explains how to set and control the temperature for runs in Avanti J and J2 series centrifuges.
Outlines the final steps to initiate a centrifugation run after loading and installation.
Describes the safe procedures for removing the rotor and recovering samples after a run.
Lists compatible tubes and bottles, including fill volumes and speed limits.
Provides the formula and example for calculating run times based on sedimentation coefficient.
Discusses how run speed affects centrifugal force and defines relative centrifugal fields (RCF).
Details periodic inspection of rotor cavities, drive pins, and lubrication of threads/O-rings.
Provides instructions for washing the rotor and its components using mild detergent and distilled water.
Offers guidance on decontaminating the rotor if exposed to radioactive materials.
Outlines methods for autoclaving, using ethanol, or bleach for rotor sterilization and disinfection.
Advises on storing the rotor in a dry environment with the lid removed to allow air circulation.
Explains the procedure and required information for returning a rotor for service or repair.
Lists part numbers for rotor assemblies, lids, and O-rings.
Lists part numbers for cleaning kits, lubricants, and references compatible tubes.
Details the process and conditions for obtaining a replacement for a defective rotor.
Lists terms and exclusions that void the rotor's warranty.
States limitations on warranties and liability for damages.
To Next Page
