Beckman Coulter DU 600 Series User Manual

512871AA
DU
®
Spectrophotometers
Installation Instructions
Batch Sampler Accessory
P/N 512814 100-240V Version
NOTICE
By default, the Batch Sampler is shipped with a setting
of 120 Volts. See Page 14 on how to convert to 230 Volts.
Beckman Coulter, Inc.
4300 N. Harbor Blvd. Fullerton, CA 92835
© Copyright 2001 Beckman Coulter, Inc.
PrintedinU.S.A.
TM

Beckman Coulter DU 600 Series Specifications

General

Detector	Silicon Photodiode
Type	UV Vis Spectrophotometer
Data Interval	0.1, 0.2, 0.5, 1, 2, 5 nm (selectable)
Data Output	RS-232C
Power Requirements	100-240 VAC, 50/60 Hz

Summary

General Description of Batch Sampler Accessory

Batch Sampler Accessory Components and Cables

Details the Batch Sampler Accessory and lists supplied cables for different DU spectrophotometer series.

Part I - Assembly of the Batch Sampler

Batch Sampler Physical Assembly Procedure

Provides step-by-step instructions for assembling the Batch Sampler unit, including pipet rod and cartridge placement.

Part II - Installation of the Batch Sampler

Connecting Batch Sampler to DU Spectrophotometers

Details connecting the Batch Sampler via cable to DU Series 600, 7000, and 800 spectrophotometers.

Part III - Start Up

Voltage Verification and Instrument Configuration

Covers verifying input voltage, configuring the spectrophotometer for the Batch Sampler, and raising the aspirator tube.

Test Tube Positioning and Aspirator Tube Adjustment

Instructs on placing test tubes and adjusting the aspirator tube height for proper operation.

Appendix A - Fuse Replacement

Procedure for Replacing Batch Sampler Fuses

Step-by-step instructions for safely replacing fuses in the Batch Sampler's power input module.

Appendix B - Changing Line Voltage

Converting Batch Sampler Line Voltage Settings

Guides users on changing the Batch Sampler's voltage setting from 120V to 100V or 220/240V.