Beckman Coulter DxC 700 AU User Manual

DxC 700 AU, Customer, Job Aid Booklet Page 1 of 60
Version 2.0 (June 2018) Beckman Coulter Technical Product Training
DxC 700 AU
Job Aid Booklet
For Training Purposes Only
These job aids are shortened versions of procedures found in the references below.
Information in the job aid is correct as of the date published. Verify you have the correct
information.
References:
 Instructions for Use DxC 700 AU Chemistry Analyzer PN B71495AC (October 2017)
 Reference Manual DxC 700 AU Chemistry Analyzer PN B71496AB (March 2017)
 DxC 700 AU Instructions for Use Addendum: Additional Instructions for Replace or Add
Reagents in MEASURE mode C07009-AB (February 2017)
 DxC 700 AU Maximum Sample Volume Limits in Sample Tubes and Cups in Racks
C02931AB (February 2017)

Beckman Coulter DxC 700 AU Specifications

General

Brand	Beckman Coulter
Model	DxC 700 AU
Category	Measuring Instruments
Language	English

Summary

Warnings and Precautions

Create a New Index

Check and Load Reagents

Reagent Main tab

View reagent quantity and status in the Main tab.

Reagent Details tab

View detailed reagent information like onboard time and expiration.

Load Reagents in MEASURE Mode

Perform Analyzer Calibration

Perform Quality Controls for All Tests

Sample Processing Using Racks

Sample Processing Using the STAT Table

Review Patient Results from Sample Status

Sample Status screen displays

Displays sample number, position, ID, order time, status, and results.

Detail screen

View detailed sample information including tests and results.

Realtime Display screen displays

Displays samples in completion order or real-time results.

Print RB/CAL/QC Reports

Program Replicates

Review Calibration Monitor

Reagent Blank and Calibration Status Indicators

Color codes indicating calibration status (Red, Yellow, Green, Purple).

RB History and Details

Steps to review Reagent Blank history and details.

CAL History and Details

Steps to review Calibration history and details.

Configure New QC Lot

Define new control lot

Entering details for a new control lot.

Define QC mean and range for a test

Setting mean and range values for QC tests.

Daily Analyzer Inspections and Preparations

Inspect the Syringes for Leaks

Inspecting syringes for leaks and proper connection.

Inspect the Wash Solution Roller Pump for Leaks

Inspecting wash solution roller pump tubing for leaks.

Inspect Probes and Mix Bars

Inspecting probes and mix bars for damage and alignment.

Update the Maintenance Log

Load ISE Reagents (ISE Option only)

Perform ISE Clean (ISE Option only)

Perform ISE Calibration (ISE Option only)

Perform and Recover from an ANALYZER STOP

Order and Perform Analyzer Calibration and QC with Laboratory Automation System (Multiple Loads STAT Table)

Order Calibrations

Procedure to order calibrations for the system.

Order QC

Procedure to order Quality Control tests.

Prepare RB, CAL and QC

Preparing Reagent Blank, Calibrators, and QC samples.

ISE Calibration Failure Troubleshooting

Check ISE Reagents

Verifying ISE reagents for calibration success.

Check ISE Standards

Verifying ISE standards for calibration success.

Check ISE Components

Checking ISE components for proper function and replacement.

Rack Jam Troubleshooting

Reagent Level Detection Error Troubleshooting

RB, CAL, QC Troubleshooting

Troubleshoot Reagent

Steps to troubleshoot reagent issues.

Troubleshoot Calibrator

Steps to troubleshoot calibrator issues.

Troubleshoot QC material

Steps to troubleshoot QC material issues.