Need help?Do you have a question about the Beckman Coulter Optima XL Series and is the answer not in the manual?
General| Type | Ultracentrifuge |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Maximum Speed | 100, 000 rpm |
| Maximum RCF | 802, 000 x g (model dependent) |
| Acceleration/Deceleration Rates | Programmable |
| Programs | Programmable |
| Power Requirements | 220-240 V, 50/60 Hz |
| Capacity | Up to 6 x 94 mL |
Certifications like UL, CSA, CE Mark.
Outlines manual's content, symbols, and terminology.
Details on speed, speed control, time, temperature settings.
Weight, dimensions, clearances, and environmental data.
Instrument rating, power line range, and wiring requirements.
Power switch, standby mode, key switch positions.
Control panel, display, keypad, softkeys, hardkeys.
Rotor chamber, vacuum, temperature sensing/control, drive.
Screen format, prompt lines, error/diagnostic messages.
Main screen layout, current values, settings, and run status messages.
Entering information, keypad usage, speed, time, ω2t, temp, accel/decel profiles.
Creating and using standard single-step programs.
Linking multiple steps into a single procedure.
Recording rotor usage and maintenance history.
Accessing lists of available rotors and their performance data.
Accessing printer menu, status, setup, and printing options.
Printing instrument usage, rotor usage, run settings, and results.
Overview of available calculation functions.
Converting between RPM and RCF values.
Determining the time required for sample pelleting.
Using ESP for optimizing run times and simulating separations.
Selecting, defining, and simulating ESP protocols.
Normal, locked, and zonal key positions for run control.
Handling power outages and accessing the sample.
Interpreting and resolving instrument errors and diagnostics.
Procedures for cleaning, decontamination, and sterilization.
Policies for product and drive unit replacement.
Legal disclaimer regarding warranties and liabilities.
To Next Page