68
86105 BA-en/00
English ⋅ Nautilus
®
T
The chamber is evacuated during preheating.
The preheating may last for up to 60 seconds.
NAUTILUS
®
T displays the end of the preheat-
ing process on the screen.
7. Stay with the device and complete the preheat-
ing process by pressing the "Complete" button.
8. Insert the mould as quickly as possible after
the preheating process has been completed.
9. Close the mould door.
The next display is shown when the mould
door is closed.
10. Confirm the melting process with "OK".
The process can be aborted by pressing the
"Abort" button.
Risk of burns!
Use mould tongs!
Never look into the melt without
protective glass and protective
eyewear!
To Next Page
Loading...
