The time and date are necessary for the casting
protocols.
Laboratory data is necessary for the casting
protocols.
Pressing on the text fields opens menus for editing.
(Casting protocols are only possible for NAUTILUS
®
CC plus.)
The existing programs can be scrolled through.
To do so, press on the inner arrows.
Firstly, it is necessary to find a BEGO alloy with
comparable composition and casting temperature*.
The program location of this alloy is then copied in
order to apply the machine parameters (e.g. use of
the crucible insert).
* See the table of the BEGO precious metal alloys in
the appendix, the BEGO catalogue or look for alloy
information on the Internet at www.bego.com.
Pressing on the text fields opens menus for editing.
Program locations 001 to 030 are available for non-
BEGO alloys. Warnings appear before existing
programs are overwritten.
Recommendation: Enter the data of the new
program location in the program table for non-
BEGO alloys (page 28).
To Next Page
Loading...
Need help?
General
