Checking the network connection with the "Varseo S - Service Board"
1. Call up the internet browser on the workstation
PC.
2. Enter the web-address of VARSEO-S
(varseo+serial-no., e.g. "varseo38200101").
The serial number can be found on the
device's type plate.
Alternatively, enter the IP-address of the
printer into the browser (will be displayed in the
"Settings" menu).
The web interface VARSEO S-Service Board
will appear! Here, you can call up information
about the printer, the print job and the printer
settings, see page 33.
Automatic firmware update
Do not switch the device off during an update.
The printer will restart after an update.
The VARSEO S will automatically update the
device software to the latest firmware version via
my.BEGO. The Varseo S checks for new versions
to be installed every time it is restarted and after
every print job.
To Next Page
Loading...