11
1.2.2 Design concept and componentry
The philosophy behind BEHRINGER products guarantees a
no-compromise circuit design and employs the best choice of
components. The operational amplifiers used in the DDX3216
are exceptional. They boast extreme linearity and very low
distortion characteristics. The 24-bit AKM
®
A/D and CRYSTAL
®
D/A converters feature excellent technical specifications and
audio properties, reproducing even the tiniest details of the analog
input signal. All computations are performed by four state-of-
the-art SHARC
®
DSPs made by ANALOG DEVICES
®
. The
professional motorized faders made by ALPS
®
are of excellent
quality and offer you maximum precision as well as smooth and
low-noise operation—even after many years of use—so as to
reproduce level settings with highest accuracy. To complement
this design the choice of components includes low-tolerance
resistors and capacitors and several other stringently selected
elements.
The DDX3216 uses SMD technology (Surface Mounted
Device). These subminiature components adapted from
aerospace technology allow for an extreme packing density to
further improve the console’s overall reliability. Additionally, your
DDX3216 was manufactured in compliance with the ISO9000
certified management system.
1.2.3 Open architecture
As the operating system (firmware) of your DDX3216 is stored
in a flash ROM, you can update the OS at any time from a personal
computer or PC card.
We are committed to improving the DDX3216 operating
software, working on new algorithms and considering your ideas
and suggestions. The resulting software updates will be made
available free of charge on the Internet, so as to ensure that
your DDX3216 will never outdate.
What is more, we will establish a forum on our web site at
www.behringer.com, from where you can download a wealth
of additional information on your DDX3216 (e. g. user manual
updates, presets for various libraries, etc.). Also, you can share
your experience with other users and keep yourself informed
about latest modifications and upgrades for your DDX3216.
1.3 Before you begin
1.3.1 Shipment
Your DDX3216 was carefully packed in the factory and the
packaging is designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage,
which may have occurred during transit.
+ If the unit is damaged, please do not return it to
BEHRINGER, but notify your dealer and the shipping
company immediately, otherwise claims for damage
or replacement may not be granted. Shipping claims
must be made by the consignee.
1.3.2 Initial operation
Be sure that there is enough space around the unit for cooling
and please do not place the DDX3216 on high-temperature
devices such as radiators or power amps etc. to avoid
overheating.
Please use the enclosed power cord to connect the unit to the
mains. The cord complies with all applicable safety standards.
Blown fuses may only be replaced by fuses of the same type
and rating.
+ Please note that all units must be grounded
properly. For your own safety, you should never
remove any ground connectors from electrical
devices or power cords, or render them inopera-
tive.
+ Please ensure that only qualified personnel install
and operate the DDX3216. During installation and
operation, the user must have sufficient electrical
contact to earth, otherwise electrostatic charges
might affect the operation of the unit.
1.3.3 Warranty
Please take the time to fill out and return the warranty card
within 14 days after the date of purchase, so as to be entitled to
benefit from our extended warranty. Or use our online registration
option available on the World Wide Web at www.behringer.com.
1. INTRODUCTION
To Next Page
Loading...
