Behringer DIGITAL DELAY DD400 User Manual

DIGITAL DELAY DD400
Digital Stereo Delay/Echo Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL DELAY DD400.
This ultimate eects pedal is designed to deliver 24-bit high-resolution stereo delay sounds comparable
to state-of-the-art studio processors. Thanks to its parameter controls, you’ll have plenty of cool sounds
at your disposal to handle every situation.
The delay eect creates a delay of the input signal with various repetitions. Dierent tempo settings
allow interesting delay eects.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The FEEDBACK (Feedback) control adjusts the amount of signal repetitions.
(3) The TIME (Delay Time) control adjusts the exact delay time. Depending on the MODE control
position you can adjust it around 200 ms, 500 ms or 1300 ms. The delay time describes
how fast the signal repetitions will follow after the original signal.
(4) With the MODE control you can chose between three dierent delay time ranges around 200 ms,
500 ms or 1300 ms with either mono (M) or stereo (S) delay. The exact delay time can be adjusted
by the TIME control. In position HOLD the signal will be repeated constantly.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a
battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS IN connector to plug in the instrument cable.
(8) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if
you want to achieve full stereo delay eect. For mono use just plug in OUT A.
(2) (3)
(1) (4)
(7)
(6)
(8)
(5)

Behringer DIGITAL DELAY DD400 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
power consumption	90 mA

Physical/Weight

dimensions	54 x 70 x 123 mm
weight	0.33 kg

Ports & Interfaces

in connector	1/4" TS
out A connector	1/4" TS
out B connector	1/4" TS