Behringer DR600 Quick Guide

DIGITAL REVERB DR600
Digital Stereo Reverb Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL REVERB DR600.
This ultimate eects pedal is specically designed to deliver 24-bit high-resolution stereo reverbs
comparable to state-of-the-art studio processors. Thanks to six renowned modes and extensive parameter
control for maximum creativity you’ll have plenty of cool sounds at your disposal for every situation.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The TONE controlallows you to shape your overall sound.
(3) The TIME control determines the rever time.
(4) The MODE control lets you chose between six dierent reverb sounds:
SPRING: Simulates classic spring reverberation.
PLATE: Simulates the sound of plat reverberation.
HALL: Very bright reverb that simulates the reections of a concert hall.
GATE: This eect snthetically cuts o reverberation after a period of time.
ROOM: Clearly hear natural room acoustics.
MODULATE: By detuning the reverb tail it creates spacious, almost choir-like reverb that reminds a
little bit of a chorus eect.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use the two ¼" TS connectors IN A and IN B to plug in a stereo input signal. For mono use just plug
in IN A.
(8) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if
you want to achieve full stereo eect. For mono use just plug in OUT A.
(1)
(2)
(4)
(5)
(6)
(3)
(8) (7)

Behringer DR600 Specifications

Power

power supply voltage	9 V
power consumption	90 mA
battery type	9 V type 6LR61

Inputs and Outputs

input A connector	1/4" TS
input A impedance	500 kΩ
output A connector	1/4" TS

Weight and Dimensions

dimensions	54 mm x 70 mm x 123 mm
weight	0.33 kg