Behringer DR600 - User Manual

DIGITAL REVERB DR600
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL
REVERB DR600. This ultimate effects pedal is specifically designed to deliver 24-bit high-
resolution stereo reverbs comparable to state-of-the-art studio processors. Thanks to
six renowned modes and extensive parameter control for maximum creativity you’ll have
plenty of cool sounds at your disposal for every situation.
1. CONTROLS
Top view
The LEVEL control adjusts the output level.
The TONE control allows you to shape your overall sound.
The TIME control determines the reverb time.
The MODE control lets you chose between six different reverb sounds:
SPRING: Simulates classic spring reverberation.
PLATE: Simulates the sound of plate reverberation.
HALL: Very bright reverb that simulates the reflections of a concert hall.
GATE: This effect synthetically cuts off reverberation after a period of time.
ROOM: Clearly hear natural room acoustics.
MODULATE: By detuning the reverb tail it creates spacious, almost choir-like
reverb that reminds a little bit of a chorus effect.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. For
mono use just plug in IN A.
The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both
connectors if you want to achieve full stereo effect. For mono use just plug in OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
 The DR600 has no on/off switch. As soon as you insert the jack into the IN
connector, the DR600 begins running. When not using the DR600, remove
the jack from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.

Summary

1. CONTROLS

Main Controls and Modes

Descriptions of LEVEL, TONE, TIME controls and the six sound MODE selections.

Indicators, Switching, and Connectivity

Explanation of the ON/BATT LED, footswitch, and input/output jack functions.

Power and Battery Operation

Details on DC power input, battery compartment, and automatic activation.

3. SPECIFICATIONS

Input;Output and Power Specifications

Technical details on connectors, impedance, and power supply requirements.

Physical and Electrical Characteristics

Specifications for battery type, power consumption, dimensions, and weight.

4. SAFETY INSTRUCTIONS

General Safety Precautions

Essential safety guidelines regarding water, heat, servicing, and authorized accessories.

Behringer DR600 Specifications

Power

power supply voltage	9 V
power consumption	90 mA
battery type	9 V type 6LR61

Inputs and Outputs

input A connector	1/4" TS
input A impedance	500 kΩ
output A connector	1/4" TS

Weight and Dimensions

dimensions	54 mm x 70 mm x 123 mm
weight	0.33 kg