Behringer Dynamic WAH DW400 - User Manual

Thank you for showing your condence in us by purchasing the BEHRINGER DYNAMIC WAH DW400.
This eects pedal delivers a variety of wah eects including a Human Voice mode creating an
unbelievable “talking” sound. Experience exciting new sounds!
1. Controls
(1) Select the eect mode via the MODE switch:
UP: Creates a Wah eect. The lter moves
upwards (from low to high frequencies).
DOWN: Creates a Wah eect. The lter
moves downwards.
SYNTH: A stronger upward Wah eect with
a synth-like resonance lter sound.
HUMAN VOICE: Turns your instrument
signal into the sound of a human voice.
The sound alters between 2 selectable
vowel sounds and adds slight overdrive.
TEMPO: Auto Wah. Tap in the tempo via
foot switch (10) or external foot switch.
(2) SENS determines the eect sensitivity,
depending on the input level. In HUMAN
VOICE mode, it selects the rst vowel.
In TEMPO mode, this control has
no function.
(3) The MANUAL control determines the wah
eects’ lowest frequency. In HUMAN VOICE mode, it selects the second vowel. In TEMPO mode,
this control has no function.
(4) The DECAY control determines how quickly the lter is shifted. In TEMPO mode, you can shape the
LFO wave form from Sine (min) to Square wave (max).
(5) The ¼" TRS EXP/CTL connector can be used to connect two dierent types of pedals:
• Use an expression pedal for Wah pedal functionality (for all modes).
• Use an external foot switch instead of the pedal foot switch ((10)) to tap in the eect time
(in Tempo mode only).
(6) Use the ¼" TS GTR IN connector to plug in a guitar. Use either input (6) or (7).
(7) Use the ¼" TS BASS IN connector to plug in a bass guitar. If you use this input, the lter parameters
are optimized for bass signals. With a cable in input (6), this input has no function.
(8) The ¼" TS OUT connector sends the signal to your amp or other eects devices.
DYNAMIC WAH DW400
Ultimate Auto-Wah/Human Voice Eects Pedal
(4)
(8)
(5)
(9)
(6)
(7)
(1)
(10)
(2)
(3)
UP, DOWN, SYNTH HUMAN VOICE TEMPO
SENS
eect sensitivity,
depending on input level
Wah 1:
Selects the rst vowel
no function
MANUAL
starting frequency
of Wah eect
Wah 2:
Selects the second vowel
no function
DECAY
Envelope
Response Time
Selects the Time used to
move from Wah 1 to Wah 2
LFO waveform shape:
Sine (Min) > Square (Max)
EXP/CTL*
Wah pedal (SENS, MANUAL
and DECAY disabled)
Fades between Wah 1 and
Wah 2 (DECAY disabled)
Wah pedal
(DECAY disabled)
*Connect an expression pedal (e.g. the FCV100) to the EXP/CTL connector

Summary

Understanding the Dynamic Wah DW400 Controls

MODE Switch: Wah and Voice Effects

Selects effect mode: UP/DOWN Wah, SYNTH, HUMAN VOICE, or TEMPO Auto Wah.

SENS Control Functionality

Adjusts effect sensitivity based on input level; selects first vowel in HUMAN VOICE mode.

MANUAL Control Functionality

Sets wah effect's lowest frequency; selects second vowel in HUMAN VOICE mode.

DECAY Control Functionality

Determines filter shift speed; shapes LFO waveform in TEMPO mode.

EXP;CTL Connector Usage

Connects expression pedal for wah or external footswitch for tempo.

GTR IN Connector

1/4" TS input for connecting a guitar.

BASS IN Connector

1/4" TS input optimized for bass guitar signals.

OUT Connector

1/4" TS output for connecting to amp or other effects.

Operation and Features

ON;BATT LED Indicator

Indicates effect activation and battery level; flashes for Tap function.

Foot Switch Operation

Activates/deactivates effect; enables Tap tempo when held for 2 seconds.

Power Supply and Battery Compartment

Details DC IN connection and 9V battery compartment access.

No On;Off Switch Operation

Device is active when plugged in; disconnect to conserve battery.

Safety Precautions

Advises against water/heat exposure and self-servicing.

Technical Specifications

Connector and Impedance Details

Specifies connector types and impedance for GTR/BASS IN, OUT, and EXP/CTL.

Power Requirements

Details power supply voltage, current, and battery type.

Physical Dimensions and Weight

Provides physical measurements and weight of the DW400.

FCC Compliance Information

FCC Rules Compliance Statement

States compliance with FCC Part 15 for Class B digital devices.

Interference Correction Measures

Provides steps to correct potential radio frequency interference.

Operational Conditions

Outlines the two conditions for device operation under FCC rules.

Modification Warning

Warns that unapproved modifications can void user authority.

Behringer Dynamic WAH DW400 Specifications

Power

power supply voltage	9 V
power consumption	30 mA
battery type	9 V type 6LR61

Connectors and Impedance

GTR IN / BASS IN connector type	¼" TS
GTR IN / BASS IN impedance	500 kΩ
OUT connector type	¼" TS
OUT impedance	1 kΩ
EXP/CTL connector type	¼" TRS
EXP/CTL impedance	1 kΩ

Weight and Dimensions

dimensions	54 x 70 x 123 mm
weight	0.33 kg