FINE button enables the JOG WHEEL to fine-tune the standard ISO frequencies.
FEEDBACK DESTROYER FBQ1000 Controls
Step 2: Controls
FREQUENCY button enables the JOG WHEEL to select the frequency that is to
be edited in Parametric EQ mode.
BANDWIDTH button enables the JOG WHEEL to adjust the filter bandwidth (Q factor) of the≈selected filter.
OPERATING LEVEL button switches between -10 dBV and +4 dBu, allowing the FBQ1000 to operate in its optimum range.
FEEDBACK DESTROYER FBQ1000 Controls
Step 2: Controls
GAIN button enables the JOG WHEEL to adjust the amount of boost or attenuation of the selected filter (+16 dB to -48 dB).
JOG WHEEL scrolls through presets and adjusts parameter values.
To Next Page
Loading...
