Audio Inputs
Connectors XLR and ¼” TRS
Type RF-filtered, servo-balanced input
Impedance 60 kΩ balanced, 30 kΩ unbalanced
Nominal operating level -10 dBV to +4 dBu (switchable)
Max. input level +16 dBu at +4 dBu nominal level, +2 dBV at -10 dBV nominal level
Audio Outputs
Connectors XLR and ¼” TRS
Type Electronically servo-balanced output stage
Impedance 60 kΩ balanced, 30 kΩ unbalanced
Max. output level +16 dBu at +4 dBu nominal level, +2 dBV at -10 dBV nominal level
System Specifications
Bandwidth 20 Hz to 20 kHz, +0/-1 dB
Noise > 94 dB, unweighted (20 Hz to 20 kHz)
THD 0.0075% typ. @ +4 dBu, 1 kHz, Gain 1
Crosstalk < -76 dB
MIDI Interface
Type 5-Pin DIN Socket IN/OUT/THRU
Digital Processing
Converters 24-bit Sigma-Delta, 64/128-times oversampling
Display
Type 2 ½-digit numeric LED display
Power Supply
Mains Voltages
USA/Canada 120 V~, 60 Hz (T 200 mA L, 250 V)
U.K./Australia 240 V~, 50 Hz (T 100 mA L, 250 V)
Europe 230 V~, 50 Hz (T 100 mA L, 250 V)
Korea 220 V~, 60 Hz (T 100 mA L, 250 V)
China 220 V~, 50 Hz (T 100 mA L, 250 V)
Japan 100 V~, 50/60 Hz (T 200 mA L, 250 V)
Power consumption approx. 15 Watts max.
Mains connection Standard IEC receptacle
Physical
Dimensions (H x W D) 44 x 483 x 195 mm (1.7 x 19 x 7.7″)
Weight 1.9 kg (4.22 lbs)
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Behringer
FEEDBACK DESTROYER FBQ1000
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118, United States
Phone Number: +1 702 800 8290
FEEDBACK DESTROYER FBQ1000
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
To Next Page
Loading...
