EasyManuals Logo

Behringer MINIFEX FEX800 User Manual

Behringer MINIFEX FEX800
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
MINIFEX FEX800
CAUTION: To reduce the risk of electric shock,
do not remove the top cover (or the
rear section). No user serviceable
parts inside; refer servicing to
qualified personnel.
WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance
to rain and moisture. The apparatus
shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside the enclosurevoltage that
may be sufficient to constitute a risk
of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
accompanying literature. Please
read the manual.
IMPORTANT SAFETY INSTRUCTIONS
DETAILED SAFETY INSTRUCTIONS:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tipping over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15) CAUTION - These service instructions are for use by qualified service personnel only. To reduce the
risk of electric shock do not perform any servicing other than that contained in the operation instructions
unless you are qualified to do so.

Other manuals for Behringer MINIFEX FEX800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Behringer MINIFEX FEX800 and is the answer not in the manual?

Behringer MINIFEX FEX800 Specifications

Input Specifications IconInput Specifications
input type¼" TS connectors, unbalanced
input impedance30 kΩ
frequency response10 Hz to 22 kHz, -3 dB
Output Specifications IconOutput Specifications
output type¼" TRS connectors, impedance balanced
output impedance220 Ω
max output level+10 dBu
System Specifications IconSystem Specifications
dynamic range96 dB, 10 Hz to 22 kHz
distortion0.01% typ. @ 0 dBFS
crosstalk-75 dB @ 1 kHz
Power Supply IconPower Supply
mains connectionexternal power supply, 9 V~, 750 mA
mains voltage (USA/Canada)120 V~, 60 Hz
power consumption7.5 W
Dimensions and Weight IconDimensions and Weight
dimensions (H x W x D)1.9 x 4.7 x 9.6", 48 x 120 x 242.6 mm
weight1.46 lbs / 0.66 kg

Related product manuals