To Next PageTo Next Page
Need help?Do you have a question about the Behringer NX1000D and is the answer not in the manual?
General| Damping factor | 155 |
|---|---|
| Amplifier class | D |
| Frequency range | 20 - 20000 Hz |
| Built-in crossover | Yes |
| Audio output channels | - channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.1 % |
| RMS power output per channel (2 Ohm) | 500 W |
| RMS power output per channel (4 Ohm) | 300 W |
| Purpose | Performance/stage |
| Cooling type | Active |
| Product color | Black |
| Connectivity technology | Wired |
| USB 2.0 ports quantity | 1 |
| Speakers connectivity type | XLR / 1⁄4\ |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power protection features | Overload |
| Power consumption (typical) | 150 W |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 483 mm |
| Height | 94 mm |
| Weight | 3400 g |
Essential safety guidelines for operating the audio equipment safely.
Details DSP section controls and the breaker function for specific models.
Explains bi-amping principles and wiring for speakers and subwoofers.
Connects two amps for separate high/low frequency amplification.
Details wiring for speakers and subwoofers in bi-amping configurations.
Uses one amp per channel with external crossover for frequency splitting.
