To Next PageTo Next Page
Need help?Do you have a question about the Behringer NX6000 and is the answer not in the manual?
General| Amplifier class | D |
|---|---|
| Output impedance | 8 Ω |
| Crossover frequency | 96000 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 3000 W |
| Signal-to-Noise Ratio (SNR) | 48 dB |
| Total Harmonic Distortion (THD) | - % |
| Speakers connectivity type | 6.35 mm / RCA |
| Purpose | Home |
| Product color | Black |
| Connectivity technology | Wired |
Covers essential safety guidelines for operating the audio equipment.
Explains the concept of bi-amping for improved speaker efficiency and sound.
Details on setting up bi-amping using separate amplifiers for high and low frequencies.
Instructions for connecting subwoofers and mid/high-range speakers in bi-amping.
Guide to setting external crossovers for frequency splitting in vertical bi-amping.
Instructions for setting amplifier mode and crossover positions for bi-amping.
Specific steps for setting up subwoofers in BIAMP mode for DSP models.
